Capacitors are commonly used electronic components in electronic devices. The structure and characteristics of several commonly used capacitors are briefly introduced below for your reference.

1 Aluminum electrolytic capacitor: It is made up of an aluminum cylinder as a negative electrode, a liquid electrolyte inside, and a bent aluminum strip as a positive electrode. It also needs to be treated by DC voltage to form an oxide film on the positive electrode sheet as a medium. It is characterized by large capacity, large leakage, poor stability, positive and negative polarity, suitable for power supply filtering or low frequency circuits. When used, the positive and negative poles should not be reversed.

2 Tantalum electrolytic capacitor: It uses metal tantalum or niobium as the positive electrode, dilute sulfuric acid and other dosing liquid as the negative electrode, and is made of the oxide film formed on the surface of tantalum or niobium. Its characteristics are: small size, large capacity, stable performance and long life. The insulation resistance is large. Good temperature performance and used in equipment with high requirements.

3 Ceramic capacitors: Ceramics are used as the medium. A silver layer is sprayed on both sides of the ceramic substrate, and then fired into a silver film as a plate. Its characteristics are: small size, good heat resistance, low loss, high insulation resistance, but small capacity, suitable for high frequency circuits. Ferroelectric ceramic capacitors have large capacity, but the loss and temperature coefficient are large, which is suitable for low frequency circuits.

4 Mica capacitor: Electrode plate is sprayed with metal foil or silver on the mica plate. The plate and mica are laminated one by one, and then die-cast in bakelite powder or sealed in epoxy resin. Its characteristics are: low dielectric loss and large insulation resistance. Small temperature coefficient for high frequency circuits.

5 Film capacitor: The structure is the same as paper capacitor, the medium is polyester or polystyrene. Polyester film capacitor, high dielectric constant, small size, large capacity, good stability, suitable for bypass capacitors. Polystyrene film capacitors have low dielectric loss and high insulation resistance, but have a large temperature coefficient and can be used in high frequency circuits.

6 Paper capacitor: Two pieces of metal foil are used as electrodes, sandwiched in extremely thin capacitor paper, rolled into a cylindrical or flat cylindrical core, and then sealed in a metal shell or an insulating material shell. It is characterized by a small size and a large capacity. However, the inherent inductance and loss are relatively large, which is suitable for low frequency circuits.

7 Metallized paper capacitor: The structure is basically the same as the paper capacitor. It is coated with a metal film on the capacitor paper to replace the metal foil. It is small in size and large in capacitance. It is generally used in low frequency circuits.

8 Oil-impregnated paper capacitor: It immerses the paper capacitor in a specially treated oil to enhance its withstand voltage. It is characterized by large capacitance and high pressure resistance, but it is bulky. In addition, in practical applications, the first is to choose different types of capacitors according to different purposes; the second is to take into account the nominal capacity of the capacitor, the allowable error, withstand voltage, leakage resistance and other technical parameters; For a negative electrolytic capacitor, the positive and negative electrodes should not be reversed during soldering.

Capacitor manufacturers look forward to your consultation

http://..........com/

E-mail/Skype: info..........com

Tel/WhatsApp: +86 15057271708

Wechat: 13857647932

Skype: Mojinxin124